June 12, 2020 Scott Derrick
What are supers?
Bees use supers to storehoney, pollen and brood. Supers come in varying heights and sizes. A deep-sized super is 9-5/8” in height and can weigh 90 pounds when full. A medium-sized super is three-fourths the capacity of the deep-sized super and is sometimes referred to as the Illinois super. It is 6-5/8” in height and can weigh close to 60 pounds when full.
A shallow-sized super is half the capacity of a deep-sized one at 5-5/8” in height and weighs approximately 40 pounds when full. Additionally, depending on their size, supers are designed to holdeightorten frames. Supers can be used as brood chambers which are also designed to holdeightorten frames.
Since the larger and deeper super is so heavy when full, many people opt to use a medium-sized super instead. Those who still struggle with the weight of the medium super may choose to use a shallow one. Many companies only sell the medium-sized supers because that size is most commonly used by the average apiarist.
How many frames should I choose?
Some beekeepers choose to only use eight or nine frames in their ten frame supers or seven in their eight-frame supers. With greater spacing between the frames, the bees can draw out a wider comb on each frame. Interestingly enough, bees can pack morehoneyin nine frames in a ten-frame super than they can in the full ten frames due to the wider comb.
Is wider better?
Wider combs on the frames can be of great benefit when it comes time to harvesting thehoney. Wider combs generally extend beyond the edges of the wooden frame making it easier to uncap the frames forhoneyextraction. Theuncapping kniferides on the edge of the frame, uncapping all the cells with ease. Aseven frame spacer toolfor use with the eight frame super or anine frame spacer toolfor use with the ten frame super takes the guesswork out of spacing. These tools provide the bees with the perfect spacing between the frames to build out a consistent width comb.
When should I add a super?
You can add as many supers on your hives as the bees can fill. It’s important thathoneysupers are added when the nectar flow is heavy to give the bees room to storehoneyand to prevent overcrowding inside the hive. How do you know when a new super is needed? A good rule to follow is to add another super when eight of ten frames in the top hive body are being used by the bees.
It’s best to add a super too early rather than too late, so if in doubt, err on the side of too early. If a super is not added in a timely fashion, you run the risk of the bees swarming. If added too early, however, they will have a lot of empty real estate to protect from wax moths and other nest invaders. Plus, if the workers move to the new super before the brood chamber has been adequately filled, they may not have enoughhoneystores to make it through the next winter.
How about splitting the hive?
If you do any late-season splits, be sure to supplemental feed the colony until it is established. Newly established colonies will also require supplemental feeding. There are many types ofsupplementalfeedersavailable.Topfeedersare added to the hive just like a super. Perforated lids screw onto mason jars to createjarfeedersthat attach to the front of the hive entrance. In a medium-sized super, a frame can be replaced with aone-gallonortwo-gallonframe feeder.
Most apiarists add aqueen excluderbetween the brood chamber and thehoneysupers tokeep the queen from laying her eggs in the supers. Worker bees can pass through the excluder; however, the queen’s larger body prevents her from going into thehoneysupers.
For more beekeeping information and advice, check back here and follow us on YouTube and Facebook.
Filed in: beekeepers, beekeeping, Beekeeping in the South, Beekeeping Supplies, brood, Honey Bee Equipment, Honeybees, supers
Chevron down icon Previous article Beekeeping During the Dearth of Nectar