So, you want to know how to remove rust from metal before painting?
Well it is much easier than you are expecting.
Remove rust from metal in just 3 simple step, with no scrubbing or sanding, by using Evapo-Rust® Heavy Duty Rust Remover. The soak will do all the work for you without any bad fumes or odors. Follow these easy steps.
How to Remove Rust from Metal Before Painting on Small Projects
Evapo-Rust is super simple for small projects. You will spending more effort finding the right size container than removing the rust.
Step 1: Prepare the Metal
In a container, pour enough EVAPO-RUST® to cover the rusted object completely. It is best to remove excess dirt and oil on the object before soaking.
The type of container doesn’t matter since Evapo-Rust® will not harm:
- Unrusted steel
- Is safe on other metals
- Does not affect plastic
Step 2: Soak the Rusted Metal
Immerse the rusty object in the solution and leave it for 30 minutes for light rust or up to overnight for extremely heavy rust.
Pro Note: EVAPO-RUST® works best in temperatures above 65 degrees.
Step 3: Rinse the Metal
When finished, rinse the item with water. If deep rust remains in pits, re-immerse the item until all the rust is gone. Un-rusted metal won’t be affected. NOTE: This stage is especially important in getting the best results.
Step 4: Just Wait
Then allow the item to air dry. It will prevent rust for up to two weeks.
You can also spray with Rust-Block™ to prevent re-rusting for up to 1 year.
How to Remove Rust from Large Metal Objects Before Painting
Sometimes your rusted metal object is too large to be submerged or is a vertical surface.
Evapo-Rust® Gel is great to use large metal projects since it clings to vertical, rusted metal surfaces. So this is how to remove rust from large metal objects that you cannot soak.
Step 1: Prepare the Metal
Prepare the item’s surface by removing any dirt or grease. Apply at temperatures between 60°F and 90°F. For best results, do not use in direct sunlight.
Step 2: Apply the Rust Remover Gel
Brush or roll on Evapo-Rust® Gel. Wait for 1-2 hours or until rust disappears.
Step 3: Rinse the Metal
Remove with a soft towel and water and wipe dry.
Step 4: Repeat (as needed)
Re-apply if needed for heavily corroded areas.
Step 5: Finish
Spray with Rust-Block™ to prevent re-rusting for up to 1 year.
Note: A product of extensive research, Evapo-Rust® rust remover is a water-based product that is easy to use.
Evapo-Rust® Gel effectively removes deep rust on all mild steel and iron types. It is safe on all surfaces and will not harm:
- copper
- brass
- aluminum
- plastic
- rubber
- vinyl
Now You Know How to Remove Rust from Metal Before Painting
Removing rust from metal doesn’t require scrubbing and sanding like it used to. And you don’t need harsh chemicals that may damage the metal or existing paint. Evapo-Rust makes is so simple to remove rust all you need is some patience to let it do the work. It is the best solution when you are are looking for how to remove rust from metal before painting.
Find all Evapo-Rust® products online or at your favorite local retailer. If you have any questions about our rust-removing products, please don’t hesitate to contact customer care or technical support. Please call (800) 556-5074.”
